Pages

Tuesday, 20 January 2015

Sheik

I'll admit it, I never played any Zelda game in my life!  As kids, my brothers and I were not allowed videos games so we never had access to them.  If there was any game that I would play however, it would have been a Legend of Zelda game.  I ended up cosplaying as Sheik to team up with a friend who commissioned a Princess Zelda costume from me.  I was very afraid of tackling this costume as there are a ton of layers and it was quite difficult to pick out the details and colours.  I chose to cosplay a version which was described as "twilight princess concept art."  It is very similar in design to the Super Smash Bros character but with darker colours.

Construction:

Shirt - In order to make the shirt, I took my Green Pepper "Crystal Lake" Skating Pattern with sleeves and modified the leotard into a shirt.  I used a navy blue knit fabric that offered a decent amount of stretch in both directions.

Completed Shirt
Leggings - The leggings were made using a thick, dark navy blue spandex.  I drafted the pattern using this tutorial I found online.  These leggings are sooo comfy!  I can wear them as normal clothes which is an added bonus ;)

Legging Construction
Harness - The harness has an interesting design to it.  I had to draft my own pattern for it using the old saran wrap and packing tape method.  It's always difficult to wrap yourself and draw on yourself even when you have a long mirror to help you out.  Luckily, the harness is symmetrical and so I only needed to get one side of my pattern right.

Harness Pattern
Once I was cut out of the pattern, I traced it on newspaper and added my seam allowance.  I cut out the pieces from a black, medium weight material as well as a medium stiff interfacing.  I sewed the interfacing to the matching black pieces before sewing everything together.  I designed the harness to have a halter top to keep it from sliding down my body as well as a functional lace up front.  The back of the harness attaches to the tabard with pins.  The harness has decorative stitches along the seam lines to give the illusions that they are holding the garment in place.  It also has two long straps on each leg with velcro fasteners to facilitate the support of the thigh armour.

Completed Harness
Armour - The armour was pretty difficult to figure out due to the colours in the image kind of melding together and the armour having strange shapes.  I ended up going with a soft armour look using craftfoam covered in fabric.  The calf armour was easily drafted by saran and tape wrapping my leg and cutting out the pattern.  The thigh armour was sketched out first, then with some careful measurements I hand drafted a pattern on newspaper, making it larger than required.  I then wrapped the pattern around my thigh and made adjustments to the pattern until I liked it.

Thigh Armour Construction
The armour for the arms was drafted using the saran and tape method once again (I swear by this method for pattern drafting).  The forearm pattern that was produced was altered to have a part that extended over the back of the hand while the shoulder armour was darted to make the rounded shape.

Shoulder Armour Construction
Once all the patterns were created, they were traced onto the craftfoam and cut out.  The patterns were transferred to the fabric with extra allowance along each edge.  The fabric was then glued to the craftfoam with hot glue.  The extra fabric was turned to the back and glued in sections.  Along curved edged the fabric was clipped or folded over to create a smooth curved edge.  The thigh armour had white bias tape glued along the edge while the arm armour had the white detailing painted on.

Painting the Trim on the Forearm Armour
Once all the fabric was glued onto the foam, the eyelet holes had to be punched.  Some armour pieces had to be punched using a hammer and a eyelet puncher on my floor (which caused holes to appear in the wood tiles all over the place) while some holes could be punched using my leather punching tool.  All the eyelets had to be hammered in place which caused dents in my floor.  Note to self, must get a small piece of plywood for hammering eyelets ;)  The lacing that was used for each shoulder piece was embroidery thread, while all the functional lacing was black cord.

Calf Armour Lacing Detail
In addition, the thigh armour was modified with D-rings to attach to the harness while the shoulder armour was equipped with velcro to attach and be supported by the shirt.  After wearing the armour for a while I noticed that the craftfoam ripped along one of the D-ring attachments and that the velcro occasional would come off if the shoulder armour was removed from the shirt.  Some adjustments will be made to the thigh armour to try and prevent further damage and shoulder armour will only be removed when the short requires a wash.

D-ring Details
Craftfoam armour does not breathe so as one can assume, it can start to smell after a period of wearing it.  I use a fabric refresher on the armour to try and alleviate the smell.  I also let it dry out on my floor.  The under garments require washing after every use, even if it was only worn for an hour or two!  Therefore this is a costume that I would only wear once every con.

Bandages - The bandaged were made by taking a light weight curtain material and ripping it across the grain.  The fabric tears very nicely and doesn't fray easily so there is not need for fray check.  The forearm bandaged just required one length of the fabric while the thigh armour required two lengths sewn together and the chest bandages required three lengths sewn together.  The fingers would be taped using surgical tape.

Chest Bandages
Tabard - The tabard was hand drafted on a piece of canvas.  The edges along the bottom and the shoulders were clipped to try and give it the ragged look while the design on the front was hand drawn in pencil, primed with gesso and carefully painted with acrylics.

Completed Tabard
Scarf - The scarf was made by taking a wide length of a white knit fabric that draped nicely.  The two ends were sewn together to create an infinity scarf.  The scarf is looped around the neck twice.  The face covering part of the scarf is a seperate piece that ties behind the neck to cover the mouth and nose.

Shoes - The shoes are actually slippers with a shoe cover sewn over them.  I chose a light blue coloured slipper from Walmart as my base and drafted the shoe cover by measuring my foot and drawing out the pattern.  The pattern had a interesting design which required multiple parts to be sewn together.  I used a seam allowance of 1.5 cm which normally works out but this time it was a little too tight.  Next time I will use a seam allowance of 2 cm.  Some of the pieces had to be sewn by hand as the machine couldn't get into the really right corners.  The entire shoe cover was then sewn onto the slipper.  The cover extended up the ankle and laces up in front.

Shoe Cover Pattern
Wig - I used a long, blonde wig I got from cosplay.com as the wig.  As Sheik has a very strange braid, I tried to mimic it by inventing the weave which then turned into a normal braid.  The hair "bandage" as I call it was a long piece of ribbon, wrapped along the end and sewn in place.  The end piece was made using craftfoam and it was glued in place.  After a few times wearing the costume the braid came updone due to rubbing.  The ribbon wasn;t completely sewn to the wig which also caused some problems.  The next iteration of the braid will involve the ribbon being glued to the wig in hopes of it staying in place.

Completed Wig
Hat - The hat is composed of two parts, the first part being the base which is a simple cap sewn from a white knit fabric with some ripped bandages sewn along the top.  The second part is composed of two lengths of the ripped bandage fabric sewn together.  It is wrapped around the head at the base of the cap and pinned in place using bobby pins and straight pins.

Accessories - To be completed

No comments:

Post a Comment